Jump to content
Maestronet Forums

Ground Coloration - Lignosulfonates??

Marcus Bretto

Recommended Posts

I’ve been bouncing ideas through my head about the color of aged/oxidized wood and started doing some investigation into wood byproducts when I came across Sodium Lignosulfonate. It’s a byproduct of removing lignin from wood in the paper pulping industry. It is a water soluble powder which can range in color from browns to reds to golds that also has properties as a dye dispersant. Something tells me it could be very good for adding some color to white wood. Any opinions? Thanks!

Link to comment
Share on other sites

On the plus side, it is non-toxic and water soluble, which means it can be safely handled and easily applied.

Since you are considering it as a ground/coloring agent, it is relevant to figure out if it acts as a pigment or a dye. Pigments applied directly to untreated wood can pose various challenges, like uneven absorption causing blotchy patches, reversing grain color and blurring grain detail. Uniform color shading without loss of grain detail is easier with dyes.

The dispersion properties of the chemical might also pose adhesion problems for varnish, especially during periods of high humidity. So you would want to run some aging tests to make sure the varnish will not eventually peel, crack or stain.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Create New...