Joe Swenson Posted December 13, 2017 Report Share Posted December 13, 2017 Got a bow in for repair and re-hair from the local music shop. The wood of the bow I just discovered is cracked and the eyelet, which is slightly undersized has such thin walls that it does not hold when tensioning the bow hair. An new eyelet of the correct thread will not tread into the frog because the stem is also undersized by 0.2 mm. Easy enough (yes?) to drill out the frog to the right dimension for the new eyelet. A 7/64 drill bit worked well on a tes piece of ebony. But the width of the new eyelet needs to be filed down to fit the bow slow but at least 0.2 mm. Depth is OK so I can leave the height if the eyelet alone which is where the old eyelet failed. So my main question is is the bow crack an issue that needs to be addressed any other way that gluing with hide glue? Or would you use white glue? The store told me this was a $600 bow. I am reminded of the Pink Panther when Inspector Clouseau destroys this grand piano and the butler reminds him that is a "Priceless Steinway"... and Clouseau responds "Not any more"... Quote Link to comment Share on other sites More sharing options...
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.