Sign in to follow this  
UG Fiddlesmith

frog screw broken

Recommended Posts

A bow was brought to me with the screw broken off  about 20mm from the button and the frog would not come off the stick; I attempted to remove the hair and was able to loosen the ferrule and the slide but that didn't help and finally cut the hair which allowed the frog to move along the stick but didn't want to come out.  After working the frog back and forth several times and removing a lot of thick grease and dirt the frog come out.  The break in the screw was flush with the eyelet which is why it finally came out but had the screw broken off and protruded from the eyelet then I don't know how the frog would be removed.  Any ideas or experiences?  I might add that it is a nice looking bow, gold mounted but with an awful rusty lead screw.  I would have thought that a bow of this quality would have had a stainless steel screw. 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.