Jump to content
Maestronet Forums

Bass bar too long?


Nicolas Temino
 Share

Recommended Posts

Hi guys,

I have recently finished the top of my new baby. It is based on a slightly modified strad G form. I have a 357 mm long top. If I use the rule I allways use to cut my bass bars: 7/9 the lenght of the top minus 80mm I get a 277 mm bass bar. Will it be too long? I am tempted to stay at the usual 270 mm lenght, as I am not sure what will be teh effect of such a bar.

And another question: If I finally decide to put the long bar, shall I also make it a little higher? Is the hight of the bar proportional to the lenght, or should I stay with the standard height that involves the top thickness?

The top is 357 mm long, it has a quite uniform thickness of 2.2-2.6 mm (slightly thicker near the f holes and around the soundpost area, around 2.9mm) and weights 64 grams (without the bass bar, of course)

Link to comment
Share on other sites

I measure 40 mm inside each end of the plate, tend to keep standard bar heights and shapes.

The main objective is to make sure it fits !

Cheers.

Ditto for me. 4cm from each end of the plate.

I have done so, 40 mm at each side and at the correct angle leads me to those 277 mm. So I guess I am on the correct way. This is the first time I make such a long instrument, so I am a bit confused.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

  • Recently Browsing   0 members

    No registered users viewing this page.



×
×
  • Create New...