Jeremy Davis Posted September 7, 2012 Report Share Posted September 7, 2012 Hello all, I've got a Automach WCS-100 Professional Reciprocating Woodcarver for sale. I'll include a detailed description and pictures below. This is really an amazing machine. I've used it to easily gouge through maple, walnut, and ebony with ease. If you are not familar with a reciprocating carver, it uses a pneumatic-type action to buffet the chisel-end hundreds of times a second via a rotary shaft. This allows you to carve through the hardest woods easily and with great control. Also, this machine is rather quiet for what it does. This particlar machine has not been used much and is very like-new. It comes with many accessories.. I've had this for a while, but never used it much. Just never got around to doing all the carving I had planned to. Anyway, these are very hard to find used, and certainly rare to find in the condition this one is in. I'm posting it here first for my MN friends before I put it up on Ebay. With this sale you will get: ~Automach WCS-100 Professional Reciprocating Woodcarver ($499 retail) ~Rotary Head Power carving tool w/key ($95 Retail) ~Eleven (11) Chisel Heads *See photo for details* ($15 ea/$165 total retail) ~Wrench & Power Cable All in all, this cost me $759, but I'm willing to let it go for $450. Shipping will be $25 CONUS, Int'l shipping is available, please inquire. If paying by Paypal, please add 3% for fees. Otherwise, a Money Order or Cashier's Check is fine. Thanks for looking! AUTOMACH Power Carver Model WCS-100 Specs: ----------------------------------------------------------------------------- * Continuous carving of hard wood, such as ebony, rosewood (for professional). * For Sculpture Carving Cutting Polishing Drilling * You can carve with one third of force at 3 - 5 times greater speed, when comparing with manual carving, and therefore you won't get tired. * Rated voltage AC 100/120V, 50/60Hz * The grabbing portion is as small as 30mm in diameter., so that you can handle this tool like a manual carving knife . * The number of blade reciprocation has become 12,000 per minute which is 2 times greater than the conventional model. * Along with 1.5mm(1/16inch) reciprocation width, the cut amount has increased by 30 - 40% * The flexible shaft (power carrying wire) has become softer and lighter, so that you can use the tool more easily. * Professionals and woodworking people admire that finished surface is finer, when compared with finished surface by manual carving. Optional Rotary Head available. * Type RH-102 Rotary Head - When you need rotation instead of reciprocation, just connect RH-102 to the flexible shaft of a Wood Carver. The Wood Carver becomes a rotary tool. Chucking capacity is up to 6.5mm, 1/4". Quote Link to comment Share on other sites More sharing options...
Jeremy Davis Posted September 11, 2012 Author Report Share Posted September 11, 2012 Ok folks, just a heads up. I'll be posting this on my local Craigslist and Ebay by the end of the week. I would rather it go to someone here, but regardless, it's gotta go. PM me even if you are slightly interested. I'll deal. Quote Link to comment Share on other sites More sharing options...
Jeremy Davis Posted September 19, 2012 Author Report Share Posted September 19, 2012 ** SOLD ** Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.