Search the Community
Showing results for tags 're-gluing'.
Found 1 result
Hi guys! So, I'm about to re-glue a top plate to a clunker violin I opened up recently. I noticed that there's lining/ chamfering that helps support the glue joint where the ribs meet the back plate. I also noticed that I might have cut through some kind of lining between the ribs and the top plate when I removed the top plate. My questions are 1. Am I correct in thinking that when a violin box is initially closed up construction, there is lining/chamfering (of willow or spruce) installed to re-enforce the connection of the top plate to the ribs? 2. If so, any tips for installing that lining? 3. When re-gluing the top plate, must I first do something to prepare the lining/ chamfering? Is is acceptable to not pay attention to the lining when re-gluing a top plate? (I'd rather err on the side of caution and *pay attention to it*, that way the repair is done as well as possible ;D ) Thanks for the help, guys! I really appreciate it! - Sarah