Search the Community
Showing results for tags 'one piece lower rib'.
Found 1 result
Hello all, This is my first post, but I’m beyond grateful for how much I’ve learned by reading through MN forums archives over the last year or so. I’ve had this violin for about 25 years and I’d deeply appreciate any insight as to it’s origins and approximate age. My 9 year old son is just starting to play, and while this is still quite a ways off from being an appropriate size for him, I’d like to get a sense whether or not it’s worth investing to get it properly repaired. Length of back is 360 mm. It has blocks at all four corners, and the linings go straight over the blocks. Lower rib appears to be one piece and I don't see evidence of a notch (but maybe I'm not looking in the right location?) The neck length is 124 mm (baroque or transitional length?) Upper bout width is 172 mm Lower bout width is 202 mm Bass bar appears to be glued in. The neck block is rectangular (squared off at and has corners, unlike the curved shaped ones I’ve seen on other violins) and from what I can see from the separation at the button, the neck appears to be morticed into it. The tail block is also rectangular. I’m assuming the brass plates on the outside of the pegbox indicate repair, but I haven’t attempted to pull them off to confirm this. It’s unlabelled and I’ve been unable to locate any markings whatsoever. There are seam separations at the button and along the lower rib and as-such, the neck angle is more shallow than it would be were it repaired properly. Let me know if there are other images or details that would be helpful. Thank you so much in advance for any info and thoughts you’re willing to contribute! warm regards, Bill NJ, USA Here's a gallery with additional photos: https://www.icloud.com/sharedalbum/#B0OGFssfGG8YpLz