Search the Community
Showing results for tags 'gluing'.
Found 2 results
Hi guys! So, I'm about to re-glue a top plate to a clunker violin I opened up recently. I noticed that there's lining/ chamfering that helps support the glue joint where the ribs meet the back plate. I also noticed that I might have cut through some kind of lining between the ribs and the top plate when I removed the top plate. My questions are 1. Am I correct in thinking that when a violin box is initially closed up construction, there is lining/chamfering (of willow or spruce) installed to re-enforce the connection of the top plate to the ribs? 2. If so, any tips for installing that lining? 3. When re-gluing the top plate, must I first do something to prepare the lining/ chamfering? Is is acceptable to not pay attention to the lining when re-gluing a top plate? (I'd rather err on the side of caution and *pay attention to it*, that way the repair is done as well as possible ;D ) Thanks for the help, guys! I really appreciate it! - Sarah
Hey guys! I have an old trade instrument that I'm cutting my repair teeth on (don't worry, it was long gone as a functional instrument when it got to me). One of the things I'd like to do is to repair a couple of deep gouges on the exterior o the top plate. In some places, the gouge is about 1 mm deep and covers a surface area about the same size as a quarter. I was thinking that I could sand the area down and patch it, like one would do to make a soundpost patch on the interior of the top plate. But, before I did that, I wanted to ask if there is any existing, accepted method for an exterior gouge repair? Or does anyone have some war stories they'd be willing to share? Thanks in advance, guys! -Sarah