Search the Community
Showing results for tags 'new concept'.
-
Content (the first figure (001 etc.) refers to the page the second figure refers to the number of my own posts. 001-1.1 Part 1 Building the experimental super light violin ————————— 008.100.1 Part 2 Debugging the sound, birth of the model of the NEW CONCEPT VIOLIN 008-100.1 Outlining possible changes for eliminating the over resonance of the low strings Experimental alterations 009-104.1 fernambuko neck 009-105.1 diminish interior air volume 009-106.1 Doubling the linings. 009-109.1 The Bayon Bass Bar 009-112.1 first rib height reduction 009-113.1 cross bars at the top side c bouts 010-116.1 overview of the previous alterations 010-119.1 x-shaped bass bar 010-121.1 trimming the x-shaped bass bar 010-123. weight reduction at edge and other places coming down 297g 010-125.1 bent top plate arriving at lowest weight of 286g 012-135.1 description of main points of the new concept (at this stage) 012-136.1 flat walnut back 136.3 one string tailpiece 012-137.1 discussing main problems (too viola like sound) and further possible alterations 012-144.1 experiment replacing the back with paper 012-148.1 string angle adjustment 012-149.1 sound comparison test of four instruments including the NCV 013-150.1 comparison of same instruments for each string alone (G D A E) 013-154.1 new (arched) back 013-157.1 enlarging upper block massively 013-159.1 further adjustments with sound post, bridge and tailpiece 161.3 adding to the x-shaped bass bar two ‘legs’ pointing to the top and lower block 013-162.1 making a bigger lower block 013-164.1 building the arched rib garland, first convex surface for the top plate 014-170.1 making concave rib surface for the back 014-174.1 final result with mp4 sound sample which can be downloaded. 014-177.1 summary and outlook on future challenges —————————- 014 - 180.1 Part 3 Building the first New Concept Violin based on the experimental insights. ————— 001-1.1 This thread is about building a violin which doesn't follow a symmetric outline for ergonomic purposes. At the same time the weight was initially kept at the bare minimum to find out in which parts of a violin mass and accompanying stiffness is needed to produce a 'good' sound. 1.2 It was the idea that starting from unconvential patterns and working with a different concept would necessarily and automatically lead to failure. Thus this would have become additional proof to the idea that the violin seen as a concept of classical makers can't be improved. While this seemed to be true at the beginning, it came clear in the continuation of various constructional experiments, that a different construction concept at least seems to be possible. 1.3 As said, it was in the first place not the goal to produce a violin with 'superior' sound characteristics but while experimenting with the violin useful hypothesis were elaborated to link constructional features with various characteristics of the sound. Princples were tested and judged by playing the instrument as well as recording sound spectra for objective comparison. 1.4 Currently this project finds itself at the turning point from being merely experimental. (Andreas Preuss, Tokyo, 2021/5/11) --------------------------------------------------------------------------------------------------------------------------------------------- 1.5 Though the original introduction of this thread has outlived itself, I believe that the general mindset is still valid. Serious violin making must not always follow already explored paths and even if there is the risk of making something foolish, there is ALWAYS the benefit of learning from unusual experiences. Everything below is the unaltered original text of this thread: 1.6 Here you can follow me constructing the super-light violin. It will be the craziest thing I ever made and please don't take it too seriously. It is the violin maker joke from my workshop. But at least I am serious enough to make it the most professional way I can imagine. So following the footprints of Antonio Stradivari everything starts with a drawing. I decided to throw over board symmetry as well and came up with the funny design below. To save weight the length is only 351mm and all distortions follow the 10 percent rule which means that one f-hole is 10 percent longer than the other.
- 374 replies