Search the Community
Showing results for tags 'Tool'.
https://www.amazon.com/Taytools-Thickness-Measuring-Resolution-Accuracy/dp/B084YR9N9V I found this dial thickness gauge on Amazon. It's supposedly made by Taylor Toolworks but I can't find the product on their website. It's about half the price of all the others I've seen, granted it has a maximum range of 22 mm. Has anyone used it or have any more information on it? It has a flat anvil tip. Is that a dealbreaker?
Hello all, I'm working up some designs for finger planes and I'd love to hear what you all think of what I have so far. A key element I'm trying to work in is some way of applying force with the palm while retaining the control in the fingertips. I'm not alone in suffering from really sore fingers when using finger planes, I'm sure, but I find fixed palm rests unbearable. The seems to give far too much leverage to allow any positional feedback on how the plane is sitting on the work, so I find the blade skips in and out as it is cammed off the wood. Does this tally with your experiences? I'm also trying to build in some really simple adjustment to the larger planes, which should make it a bit easier to tweak them on the fly rather than sharpening, fitting and forgetting. Is this just unnecessary complexity? I've been sharing some progress on this thread over on mandolincafe, if anyone's interested: http://www.mandolincafe.com/forum/showthread.php?122495-Finger-plane-designs-prototypes-etc Here is a selection of rough prototypes, in vaguely chronological order: This was the first in brass. you can see it has a dovetailed in boxwood sole. It's nice to use, but not enough to justify the extra wear and bulk. This is the adjustment mechanism I've worked out, it's pretty self explanatory. I was just trying to make one simple enough to work on a really small scale. The rather ungainly ball on the cap pops into the socket in this palm handle. The idea is that you can use your palm to put pressure on the plane, but steer it in three dimensions with your fingertips. Power-steering! It seems effective, although it's sitting too high on this prototype I think. The next thing I worked on was just an ergonomic study, really. I was trying to reduce the amount of 'squeeze' needed to keep hold of it as you're working. This one also has a 'rabbet plane' type iron, which is super handy for carving bass bars and just giving a bit more working area at the same size. That is, until you take one stroke across the grain, and the shavings immediately jam in the mouth. I tried giving the 'arms' a knife edge, but I think this kind of iron just doesn't work at all on this scale. Bringing back the elements I'd worked out, but going back to a normal iron. Please excuse the 'knurling', I was in a hurry! The handle now snaps into the back of the adjuster, and fall under the fingers nicely. The handle just pops out if it's not in use. I'm mostly concentrating on working up the 10/12mm size planes, as these seem to be the workhorses. However, I did have a go at translating this design to a tiny 5mm plane. Again, prototype quality so excuse the wobbles. Any thoughts on where these are going? Suggestions for improvements? I'd love to hear any and all opinions, as blunt as possible please. Alf.
Hello. I'm new this website. Also i'm beginner instrumenta build. I need a suggest tools for viol instruments. I was looking tools from Pfeil, Lie Nilsen, Veritas, Staudi, Crown and Herdim tools. There are anyone know information about Veritas, Crown and Staudi? I hear Staudi metal are goods. So i want be sure. Also i try buy 1 or 2 chisels, 1 or 2 gouges and 1 plane. I was search online shop and total almost 260euro. So i'm not sure is good price or too much expensive for begining. I'm try make price not over 250euro. But even same brands tools are price too different. So i'm not sure which will be better for beginner. I'm trying buy only few tools as i said and each one different brands. Because i want check which brands will be good to me. So if anyone can suggest to me it will be thanksful. Ps there are anyone also know how to build by myself violin making knife?
Hello. I'm new this website also i'm beginner. I need suggest tools for viol instruments. I'm trying buy 1 or 2 chisels, 1 or 2 gouges and 1 plane. What i was checking tools from pfeil, Lie Nilsen, Veritas, Crown, Staudi and Hersim tools. There are any people have information about Crown, Veritas and Staudi. I hear Staudi metal is good but i don't have many information for good tools brands for beginner. I'm think each tool not over 75euro and total not over 300 euro. What i afraid is even in same brand tools are price too much up and down so i'm not sure what is better. Because all the time look for good tools and then price are up also. I'm also think not buy lot of tools and buy tools each one different brands and test which brands are good to me. There are anyone can suggest me good tools? Thank you. Ps. There are anyone also know how to making violin knife tools? Please let me know!